How to care for your hair shears

Short answer: wipe and dry your shears after every client, put a drop of shear oil on the pivot every day, check the tension once a week, and keep them closed in their pouch. Have them sharpened only by Hachi Shears: sharpening anywhere else, or a drop, voids the lifetime warranty.

After every client: wipe and dry

Hair, product and water dull a blade faster than cutting does.

  • Wipe both blades with a soft, dry cloth, from the pivot towards the tip, with the blades closed.
  • If you disinfect, use a spray that’s safe on metal, then dry the shear completely. 440C stainless steel resists rust but isn’t rust-proof, so never leave a shear wet or soaking.

Every day: one drop of oil

  • Open the shear to a V and put one drop of shear oil where the blades meet at the pivot.
  • Open and close it a few times so the oil works in, then wipe off the extra.
  • Oil keeps the action smooth and stops hair and grit from wearing the pivot.

Once a week: check the tension

Tension is how tightly the two blades are held together at the pivot.

  1. Hold the shear by the finger ring with the tips pointing up.
  2. Lift the thumb blade until the shear is fully open, then let it go.
  3. Good tension: the blade falls part of the way and stops, still slightly open.

  4. Too loose: it swings fully closed. Hair can fold between the blades instead of being cut.

  5. Too tight: it barely moves. Your hand tires and the edges wear faster.

If your shear has a tension knob or screw, adjust it a small amount at a time and test again.

Store them safely

  • Keep shears closed, in their pouch or case, whenever they’re not in your hand. (A zipper pouch is offered as an upgrade on every shear page.)
  • Don’t leave them on the edge of the station or in an apron pocket while you work. A fall can chip the edge or bend the blade, and a dropped shear isn’t covered by the warranty.

Cut hair, and only hair

Paper, tape, thread and plastic wear the edge quickly. Keep a cheap pair of scissors for everything else.

Sharpening: only by Hachi

  • When: when the shear starts pushing or folding hair instead of cutting cleanly, even with the right tension and oil.
  • Who: send it to Hachi Shears. Sharpening by anyone else voids the lifetime warranty. Contact us to arrange it.

About the warranty

Every Hachi shear has a lifetime warranty against manufacturing defects. It doesn’t cover drops, or sharpening by anyone other than Hachi Shears. Full terms: FAQs and Delivery & Return.

Common questions

Which oil should I use? A light oil made for shears or clippers. Avoid cooking oil, which goes sticky.

My shear feels stiff after cleaning. Why? Usually the pivot is dry. Add a drop of oil, open and close it a few times, then check the tension.

Can I adjust the tension myself? Yes, if your shear has an adjustment knob or screw. Make small changes and re-test. If it still feels wrong, contact us.

By the Hachi Shears team. Last updated 1 October 2026.