Convex vs beveled edge: which shears for slide cutting?
Short answer: for slide cutting (slicing), choose a convex edge. A convex edge is ground in a smooth curve to a very fine, very sharp edge, so the open blades glide down the hair without pulling. A beveled edge has a flat angled edge, often with tiny serrations that grip the hair. That grip helps with blunt cutting, but it catches and pulls when you slide. Every Hachi cutting shear listed below has a convex edge, including our left-handed Hidari-Kiki and Cosmo Left Handed.
What is a convex edge?
On a convex edge the outside of the blade curves smoothly all the way down to the cutting edge, with no visible line before it. The inside of the blade is hollow ground. Together they make the thinnest, sharpest edge a shear can have. It is the Japanese style of shear and the one most stylists mean when they talk about a professional shear.
- Good for: slide cutting, point cutting, texturizing with the cutting shear, and smooth blunt lines.
- Feels like: very little effort, a quiet, clean cut, and hair that falls instead of being pushed.
- Needs: a little care. Close it when you put it down, keep it off hard floors, and have it sharpened by someone who works on convex edges.
What is a beveled edge?
A beveled edge has a distinct flat strip, a second angle, along the cutting edge. It is a sturdier, less sharp edge. Many beveled shears add micro-serrations on one blade so the hair cannot slip as you close the blades.
- Good for: blunt cutting, scissor-over-comb on short hair, and cutting dry, coarse hair where you want the shear to hold the hair still.
- Not good for: slide cutting. The serrations or the steeper angle catch the hair and pull.
Convex or beveled: side by side
| Convex edge | Beveled edge | |
|---|---|---|
| Sharpness | Very sharp, fine edge | Less sharp, sturdier edge |
| Slide cutting | Yes, made for it | No, it grips and pulls |
| Point cutting | Yes | Possible, less precise |
| Blunt cutting | Yes, clean lines | Yes, the hair is held still |
| Effort per cut | Low | Higher |
| Sharpening | A convex specialist | Most sharpening services |
How can I tell which edge a shear has?
- Open the shear and look along the outside of a blade toward the cutting edge.
- Convex: the surface curves smoothly right to the edge. There is no line.
- Beveled: you see a narrow flat strip running along the edge, with a clear line where it starts.
- Tilt the blade under a light. Tiny teeth along one edge mean micro-serrations, which you only find on beveled shears.
Which Hachi shears have a convex edge?
All of these cutting shears have a convex edge, in 440C or VG10 Japanese forged steel:
- Cosmo and the Cosmo Left Handed
- Hidari-Kiki, a true left-handed shear
- Shinkai and HG-605
- Black Pearl, Purple Shear and Jade
- Blue Diamond in VG10 steel
Most also come as a set with their matching thinning shear. Not sure about the length? See our guide to shear sizes, or which Hachi shear to buy.
Questions stylists ask
Do thinning shears have a convex edge too?
A thinning shear has one toothed blade and one straight blade. Its straight blade can be convex or beveled, but the teeth decide how it cuts, so for slide cutting the edge of your cutting shear matters most.
Is a convex edge harder to look after?
A little. It is thinner, so a drop can chip it. Wipe and oil it after the day, store it closed, and send it to a sharpener who works on convex edges. See how to care for your hair shears.
I am left-handed. Can I slide cut?
Yes, with a true left-handed shear that also has a convex edge. A right-handed shear in the left hand pushes the blades apart, which makes sliding even harder. See left-handed hair shears explained.







